THE BRIDGE TIMBRE CD PLAYER v2.0d

!!!YOU MUST HAVE VBRUN300.DLL IN YOUR \WINDOWS\SYSTEM DIRECTORY BEFORE INSTALLING THIS 
VERSION!!!

BEFORE YOU BEGIN

If your computer has a multimedia sound card installed, make sure audio support driver is
installed for your CD-Rom drive.  Use the following steps to install MCI CD audio support:

	1. Double-click the Control Panel icon which should be located in your Main group.
	2. Double-click the Drivers icon.
	3. Select ADD.
	4. From the list choose [MCI] CD Audio
	5. Press the OK button and insert disks as required by the prompts.


INSTALLATION

If you are installing The Bridge Timbre CD Player from a floppy 
disk:

	1. Start Windows
	2. Insert diskette into drive A
	3. From Program manager, select File menu and choose Run.
	4. Type "a:\setup" and press enter.

If you have just downloaded this program from a BBS, make sure 
all the files that were enclosed in the compressed file are in 
the same directory. Then:

	1. Start Windows
	2. From Program Manager, select File menu and choose Run.
	3. Type "[drive]:[path]\setup" and press enter.

You should have all of the following 18 files:

btcd.ex_
btcdhelp.hl_
btmanual.wr_
cmdialog.vb_
commdlg.dl_
ddeml.dl_
file_id.di_
license.wr_
mci.vb_
readme.tx_
register.wr_
setup.exe
setup.1st
setup1.ex_
setupkit.dl_
threed.vb_
vbrun300.dl_
ver.dl_